UEi KANE 522KIT Oil Burner & Boiler Install Kit with C161 Combustion Analyzer, Clamp Meter, Manometer, Leak Detector, Thermometer, and Smoke Test Kit

Product Description

UEi KANE 522KIT Oil Burner & Boiler Install Kit with C161 Combustion Analyzer, Clamp Meter, Manometer, Leak Detector, Thermometer, and Smoke Test Kit.
UEi KANE 522KIT Oil Burner & Boiler Install Kit with C161 Combustion Analyzer, Clamp Meter, Manometer, Leak Detector, Thermometer, and Smoke Test Kit Featuring the C161, DL579, EM201B, CD100A, and PDT655. This Kit provides the recommended test instruments required by Oil Burner & Boiler start up manuals for proper installation and maintenance. Most equipment warranties require initial install readings to be documented upon installation.The 522KIT is packed in a UEi Tool Backpack. Built rugged, waterproof base, two compartments with inner pocket options and includes D-clip. This Kits helps confirm: Manufacturer requirements to maintain warranty Combustion analysis for fuel efficiency Heat exchanger integrity Smoke level in the flue gases CFM via external static pressure test Gas flow pressure System is safe from gas leaks Proper high voltage to power supply and ground Low voltage meets wiring diagram requirements UEI C161 Residential Combustion Analyzer Don't miss out on the great benefits of UEi Service+. Register your combustion analyzer with UEi and get notified when its time to recertify. Backed by UEi Service+ to allow up to 10 years' warranty, same day recertification and a reduced cost of ownership. The C161 Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections and altitude compensation. Prints to optional printer. Essential information for the installation and maintenance of furnaces and boilers. C161 has two types of sensor protection; a NOx filtered CO sensor and Low Flow Detection. It also has sensor technology that reduces the cost of ownership, a Heat Exchanger test to check the exchanger integrity, and differential temperature. The C161 comes with high altitude compensation to maintain accurate readings at any altitude, auto-purge shut off, and 8 Pre-programmed fuels including Natural Gas and Propane. The C161 has a 6-Line display to view readings on one screen, which is a favorite among technicians. The DMM Style dial makes it easy to select the test needed. It also features a water trap to protect the sensor with a check light to remind to look for condensate built-up, a magnetic boot for hands-free operations, and an IR printer port to print to an optional printer sold separately, making it easy to document test results for later analysis. Product Features & Functions: Up to 6 Year warranty with annual recertification 2 Types of Sensor Protection NOx Filtered K-Type Temperature Inputs Low Flow Detection Temp differential 6 line backlit display 8 Preprogrammed Fuels 30 second start time High altitude compensation 30 Memory Positions Protective Water Trap Automatic fresh air purge Magnetic mount IR printer link (Printer not included) UEi DL579 True RMS Clamp Meter with Temperature and Capacitance True-RMS Dual Display 600A HVAC/R Clamp Meter w/ Temperature & Capacitance ApplicationMeasure capacitance, voltage, circuit continuity, resistance, temperature via K-Type thermocouples and diode malfunctions. Check system boards and live wires. Functions: TRMS: Yes AC Volts: 750VAC DC Volts: 1000VDC AC current (amps): 600A AC AC micro current (amps): 2000µA DC micro current (amps) 2000µA DC micro volts: 600mV AC micro volts: 600mV Resistance (Ohms): 60MΩ Capacitance (Farads): 6000µF Frequency (Hertz): 99.99kHz Duty cycle: 1.0 to 99.0% Temperature: -328° to 2462°F Continuity: Yes Diode: Yes NCV Detection: Yes LRA Inrush: Yes Low Z: Yes Features: Hold: Yes Min/Max: Yes Ranging: Auto/Manual Auto power off: Yes Display count: 6000 Low battery warning: Yes Backlight: Yes Dual display: Yes Temperature Inputs: K-Type …

UEi Combustible Gas Leak Detector CD100A is engineered for both residential and commercial applications. The semiconductor sensor responds to all combustible gases, and provides accurate, consistent detection. A flexible 18 in. wand allows you to pinpoint the location of the combustible gas leak, and to check if the work you have completed was successful. Adjustable tic rate increases as the sensor wand nears the leak.

Uei CD100A - Combustible GAS Leak Detector

UEi C161 Residential Flue Gas Combustion Analyzer with CO2 Measurement

UEi KANE 522KIT Oil Burner & Boiler Install Kit with C161 Combustion Analyzer, Clamp Meter, Manometer, Leak Detector, Thermometer, and Smoke Test Kit

UEi 522KIT Oil Burner & Boiler Install Kit with C161 Combustion Analyzer, Clamp Meter, Manometer, Leak Detector, Thermometer, and Smoke Test Kit

C161 - RESIDENTIAL COMBUSTION ANALYZER

C161KIT - RESIDENTIAL COMBUSTION ANALYZER KIT W/ PRINTER/CAS

C161 - RESIDENTIAL COMBUSTION ANALYZER

UEi Test Instruments CD100A Combustible Gas Leak Detector

C161 - RESIDENTIAL COMBUSTION ANALYZER

C165 - Residential/Commercial Combustion Analyzer

C161 - UEi Test Instruments C161 - C161, Flue Gas Combustion Analyzer

UEi Oil Burner & Boiler Install Kit 522KIT

UEi Gas Analyzers & Combustion Analyzers for sale

UEi Gas Analyzers & Combustion Analyzers for sale